Posted on 01 October 2009 by American 110 Volts Step up to American 220 Volts Power Tap for USA-CANADA Use
INPUT:
- Two 36 inch power cords, 20 amperes each line, NEMA 5-20 plugs
OUTPUT VOLTAGE:
- 15 and 20 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.
- Portable, easy to use
- Silent
- Outlets for US 220 volt locking plug
- Plug the 220 power tap into two independent 110 volt outlets without ground fault interrupters in the circuits. Connect your 220 volt equipment.
- Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
- Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)
OUTPUT POWER:
- 4400 watts continuous; 22,000 watts peak, typical at 220 volts.
OUTPUT CURRENT:
- 20 amps continuous
OUTPUT RECEPTACLE:
- locking, single, NEMA L6-20R
POWER CONSUMPTION:
- 8 watts, plus equipment connected
SIZE:
- Approximately 6-1/2 inches x 5 inches x 3 inches
WEIGHT:
- 2.7 pounds
ENVIRONMENT:
- 35 to 95 degrees F, 85% relative humidity, max., non-condensing. No explosive gases, dust or other materials. Always keep Dry and Away from water, oils or other liquids. Avoid excessive dust.
LIMITED WARRANTY:
- One year warranty
…
Posted on 01 October 2009 by American 110 Volts Step up to American 220 Volts Power Tap for USA-CANADA Use
INPUT:
- Voltage: 108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase
- Model A220-20: Two 36 inch power cords, 20 amperes each line, NEMA 5-20 plugs
OUTPUT VOLTAGE:
- 20 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.
- Portable, easy to use
- Silent
- Outlets for US 220 volt straight blade plugs
- Plug the 220 power tap into two independent 110 volt outlets without ground fault interrupters in the circuits. Connect your 220 volt equipment.
- Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
- Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)
OUTPUT POWER:
- 4400 watts continuous; 22,000 watts peak, typical at 220 volts.
OUTPUT CURRENT:
- 20 amps continuous
OUTPUT RECEPTACLE:
- straight blade, duplex, NEMA 6-20R
POWER CONSUMPTION:
- 8 watts, plus equipment connected
SIZE:
- Approximately 6-1/2 inches x 5 inches x 3 inches
WEIGHT:
- 2.7 pounds
ENVIRONMENT:
- 35 to 95 degrees F, 85% relative humidity, max., non-condensing. No explosive gases, dust or other materials. Always keep Dry and Away from water, oils or other liquids. Avoid excessive dust.
LIMITED WARRANTY:
- One year warranty
…
Posted on 01 October 2009 by American 110 Volts Step up to American 220 Volts Power Tap for USA-CANADA Use
INPUT:
Voltage: 108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase
Two 36 inch power cords, 15 amperes each line, NEMA 5-15 plugs
OUTPUT VOLTAGE:
15 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.
Portable, easy to use
Silent
Outlets for US 220 volt straight blade
Plug the 220 power tap into two independent 110 volt outlets without ground fault interrupters in the circuits. Connect your 220 volt equipment.
Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)
OUTPUT POWER:
3300 watts continuous, 16,500 watts peak, typical at 220 volts.
OUTPUT CURRENT:
15 amps continuous
OUTPUT RECEPTACLE:
straight blade, duplex, NEMA 6-15R
POWER CONSUMPTION:
8 watts, plus equipment connected
SIZE:
Approximately 6-1/2 inches x 5 inches x 3 inches
WEIGHT:
2.7 pounds
ENVIRONMENT:
35 to 95 degrees F, 85% relative humidity, max., non-condensing. No explosive gases, dust or other materials. Always keep Dry and Away from water, oils or other liquids. Avoid excessive dust.
LIMITED WARRANTY:
One year warranty
