20 Ampere, 4400 watts outlet 220 Volts, NEMA L6-20R, Twist Lock Outlet

Posted on 01 October 2009 by American 110 Volts Step up to American 220 Volts Power Tap for USA-CANADA Use

    INPUT:

  • Two 36 inch power cords, 20 amperes each line, NEMA 5-20 plugs

    OUTPUT VOLTAGE:

  • 15 and 20 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.
  • Portable, easy to use
  • Silent
  • Outlets for US 220 volt locking plug
  • Plug the 220 power tap into two independent 110 volt outlets without ground fault interrupters in the circuits. Connect your 220 volt equipment.
  • Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
  • Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)

    OUTPUT POWER:

  • 4400 watts continuous; 22,000 watts peak, typical at 220 volts.

    OUTPUT CURRENT:

  • 20 amps continuous

    OUTPUT RECEPTACLE:

  • locking, single, NEMA L6-20R

    POWER CONSUMPTION:

  • 8 watts, plus equipment connected

    SIZE:

  • Approximately 6-1/2 inches x 5 inches x 3 inches

    WEIGHT:

  • 2.7 pounds

    ENVIRONMENT:

  • 35 to 95 degrees F, 85% relative humidity, max., non-condensing. No explosive gases, dust or other materials. Always keep Dry and Away from water, oils or other liquids. Avoid excessive dust.

    LIMITED WARRANTY:

  • One year warranty
  • http://www.110220volts.com/Merchant2/graphics/00000001/install220v.JPG


»crosslinked«

Tags: , , , , , , , , , , , ,

Comments are closed.

Advertise Here
Advertise Here

RELATED SITES